Dynomotion

Group: DynoMotion Message: 9826 From: daveymahomh600e Date: 7/22/2014
Subject: Brushed Servo SnapAmp Startup File

Hi Tom,


I am trying to setup a machine which uses 2 Pittman brushed DC servo motors and a SnapAmp.


After some searching for an example of an init file which would be a starting point, I came up empty-handed. This machine has been refitted with quadrature encoders, but retains the original DC brushed servo motors.


Could I bother you to point me at a sample start file?


Thank you in advance,

David.
Group: DynoMotion Message: 9841 From: Tom Kerekes Date: 7/22/2014
Subject: Re: Brushed Servo SnapAmp Startup File
Hi David,

You might start with the Configuration BrushServoMechanism.mot

Regards
TK

From: "david.m.stevenson@... [DynoMotion]" <DynoMotion@yahoogroups.com>
To: DynoMotion@yahoogroups.com
Sent: Tuesday, July 22, 2014 11:49 AM
Subject: [DynoMotion] Brushed Servo SnapAmp Startup File

 
Hi Tom,

I am trying to setup a machine which uses 2 Pittman brushed DC servo motors and a SnapAmp.

After some searching for an example of an init file which would be a starting point, I came up empty-handed. This machine has been refitted with quadrature encoders, but retains the original DC brushed servo motors.

Could I bother you to point me at a sample start file?

Thank you in advance,
David.
Group: DynoMotion Message: 9844 From: David Stevenson Date: 7/23/2014
Subject: Re: Brushed Servo SnapAmp Startup File
Thank you Tom.

Regards,
David.

On 7/23/2014 2:53 AM, Tom Kerekes tk@... [DynoMotion] wrote:
 
Hi David,

You might start with the Configuration BrushServoMechanism.mot

Regards
TK

From: "david.m.stevenson@... [DynoMotion]" <DynoMotion@yahoogroups.com>
To: DynoMotion@yahoogroups.com
Sent: Tuesday, July 22, 2014 11:49 AM
Subject: [DynoMotion] Brushed Servo SnapAmp Startup File

 
Hi Tom,

I am trying to setup a machine which uses 2 Pittman brushed DC servo motors and a SnapAmp.

After some searching for an example of an init file which would be a starting point, I came up empty-handed. This machine has been refitted with quadrature encoders, but retains the original DC brushed servo motors.

Could I bother you to point me at a sample start file?

Thank you in advance,
David.